----- Original Message ----- From: "David Love" <davidlovepianos@hotmail.com> To: <pianotech@ptg.org> Sent: May 09, 2001 12:23 PM Subject: TP bushings: was pinblock hole alignment > I agree that plug and redrill is best. But your post brings up another > question. I've always thought that when using tuning pin bushings it is > best to drill through the bushing into the block so that the holes are > aligned. Thus, when using bushings it is necessary to drill the block > either in the piano or at least while attached to the plate. Comments? > > David Love ------------------------------------------------------ Well, that is what they were invented for. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC