Ron, That's what I meant to imply. I guess at 12 noon on a Sunday makes me a little slow, only been out of the sack for two hours, takes time to think on a Sunday. Still, I guess we are ahead of you somewhere Tony ----- Original Message ----- From: Ron Nossaman <RNossaman@KSCABLE.com> To: <pianotech@ptg.org> Sent: Sunday, May 27, 2001 12:53 PM Subject: Re: Your(butt flange) choice, please > > > > > What you are talking about is common with many action including Renner. > > Surprisingly enough the same system on the plastic Kawai flange does not come > > loose, I guess it boils down to how well the action parts were seasoned (or > > dried) the type of timber used and the grain orientation in the individual > > part. > > --------------------------- > > Tony Caught ICPTG > > > > Tony, > The Kawai system with the plastic action parts wouldn't get loose because the > plastic doesn't respond to humidity changes like wood does. That's THE primary > reason to use ABS for action parts. > > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC