This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: David Stanwood=20 To: pianotech@ptg.org=20 Sent: October 16, 2001 5:39 AM Subject: Re: Hammer weight/density Just a reminder that I've published on this list and am making = available my hammer weight standards which give us a common lanquage for = talking about hammer weight. For instance if you say "I found that a = 1/2 medium zone hammer weight in the bass to 1/4 high in the treble, = blah, blah, blah......" everyone would know what you are talking about = within a few tenths of a gram.... -------------------------------------------------------------------------= ----- Thanks, but I rather suspect even this is going to be overly complex for = the purpose. It will be some difficult to get a production hammer maker = to specify the overall mass of a given set, let alone take the = measurements to break it down into zones. The same, sadly, is going to = be true of any resilience standard. Del ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0d/13/43/01/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC