Hi Newton, Eterna's were sold by Yamaha dealers in Canada, as an entry level piano. The case was pressboard, or whatever you call that glued together sawdust. It did not even have veneer, it had a formica type woodgrained material. It was a Yamaha though, I don't believe they sell them anymore. For an entry level, they sounded not bad. I can find out more from the local dealer, if you want. Although it would have to wait till, I went there, as I don't think he has e-mail. Regards, John M. Ross Windsor, Nova Scotia, Canada piano.tech@ns.sympatico.ca ----- Original Message ----- From: "Newton Hunt" <nhunt@optonline.net> Sent: Sunday, October 28, 2001 3:52 PM Subject: Eterna Piano > DOes anyone know of, had experience with or have information about a > piano called Eterna. It is an exact copy of a Yamaha U1. So much so > that I can not tell the difference except for the hammer heels. Keys, > plate, action and hammers are the same as Yamaha. > > Unfortunately the dealer put a plate saying "yamaha" to cover the > original name. My concern is that it is a "gray market" piano brought > here from Japan or other similar places but is not make for this > climate. The tuning pins are on the loose side and could be looser by > spring time. > > It needs regulation but the hammers have been files (fairly well) but > otherwise it is a good piano. > > Any information would be appreciated since I have to make a > recommendation tot he customer about buying the instrument. She plays > clarinet but needs a piano for her studio. > > It is not listed in my 7th Pierce. > > Thank you. > > Newton > NJ >
This PTG archive page provided courtesy of Moy Piano Service, LLC