This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment David, It is not adviseable to "clamp" epoxy. Use a gap filling type and just = let it set to almost, then clean up by scraping, etc. Also not = adviseable to use the compatible solvent, of which there are two, (there = may be more), Alcohol and lacquer thinner are verboten, it will simply = break down the strenght of the epoxy. I personally use "steel epoxy" for = this kind of repair. regards, Joe Garrett ----- Original Message -----=20 From: David Love=20 To: Pianotech=20 Sent: Friday, August 31, 2001 10:07 AM Subject: split bridge I have a customer with a Boesendorfer 225 c 1978. The bridge is = splitting along the speaking side pin line on the top 5-6 notes. I'm = not sure how long it has been this way, this is the first time I've seen = the piano. My intention is to remove strings from this area, work epoxy = into the crack, pull it all back together with clamps and clean off the = excess with a bit of lacquer thinner. Any comments. =20 David Love ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fb/0f/17/b3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC