Regarding building up the worn areas, I have used, and highly recommend
the Wood Rebuilder sold by Webb Phillips. It is versatile, and can be
easily machined after it cures (in less time than you may think!). It
is a two part system, a liquid and a hardener/wood dust. You mix as
thick or thin as you like (thicker = faster cure). A thick mix hardens
in less than 10 mins. Try it- you'll like it!
Good luck,
Paul McCloud
San Diego
--
mailto:pmc333@earthlink.net
This PTG archive page provided courtesy of Moy Piano Service, LLC