If I find anything out of the ordinary enough to take
>significantly more time, like excessively tight key balance rail holes,
>that will be taken care of at an expense beyond the service bond allowance.
Hi Ron,
Get your self a new balace rail pin, chuck it in to a cordless
drill. One pump and a quick short pull of the trigger, and all holes can
be perfectly sized and fitted in about 10mins. We see a lot of very tight
pins in our climate.
Regards Roger
Roger Jolly
Balwin Yamaha Piano Centres.
Saskatoon/Regina.
Canada.
This PTG archive page provided courtesy of Moy Piano Service, LLC