Estimate on replacing a Steiway Teflon (TM) action with a regular type

[Wimblees@AOL.COM]

---------------------- multipart/alternative attachment
In a message dated 8/4/02 6:58:12 PM !!!First Boot!!!, lclgcnp@yahoo.com 
writes:


> Once again I am humbly appealing to you: to
> provide me with a rough estimate of how much one
> normally charges for totally replacing a Steinway
> Teflon (TM) action with felt bushed, and thoroughly
> regulating it a la Boone's book.
>       I got into a "bad deal" with the Food Service
> Dept. at a major University here, where I did all this
> work without a detailed contract, and may now not get
> paid! Any written testimonials which I may present to
> them would be extremely helpful, and most greatly
> appreciated!
>      Most Sincerely
>      Gordon Stelter
> 

I don't think any of us have to tell you, that from now on, get written 
approval before you do any work, especially with an institution.

A rough estimate would be the cost of the parts, doubled, and about 20 hours 
of work. I don't know what you charge per hour, but it should be at least $60 
-- $70 per hour. Pasts are roughly $1300. So you're looking at about $4000 
total. 

Wim.

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ec/45/81/f3/attachment.htm

---------------------- multipart/alternative attachment--