Estimate on replacing a Steiway Teflon (TM) action with a regular type

[gordon stelter]

Thanks Wim!
     Gordon
--- Wimblees@AOL.COM wrote:
> In a message dated 8/4/02 6:58:12 PM !!!First
> Boot!!!, lclgcnp@yahoo.com 
> writes:
> 
> 
> > Once again I am humbly appealing to you: to
> > provide me with a rough estimate of how much one
> > normally charges for totally replacing a Steinway
> > Teflon (TM) action with felt bushed, and
> thoroughly
> > regulating it a la Boone's book.
> >       I got into a "bad deal" with the Food
> Service
> > Dept. at a major University here, where I did all
> this
> > work without a detailed contract, and may now not
> get
> > paid! Any written testimonials which I may present
> to
> > them would be extremely helpful, and most greatly
> > appreciated!
> >      Most Sincerely
> >      Gordon Stelter
> > 
> 
> I don't think any of us have to tell you, that from
> now on, get written 
> approval before you do any work, especially with an
> institution.
> 
> A rough estimate would be the cost of the parts,
> doubled, and about 20 hours 
> of work. I don't know what you charge per hour, but
> it should be at least $60 
> -- $70 per hour. Pasts are roughly $1300. So you're
> looking at about $4000 
> total. 
> 
> Wim.
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com