---------------------- multipart/alternative attachment In a message dated 8/12/02 1:05:32 PM Central Daylight Time, jonpage@attbi.com (Jon Page) writes: > > >> Remember, that cloth should only be glued with a bead of glue at the back >> end so that some veneer or thin cardboard can be used to shim it to the >> proper height. <snip> > ackrail cloth which is glued at the rear of the felt will cause noise upon > key return. Glue along the front edge leaving the back free, > shims can be place under that edge. > > Thanks to both of you who caught my *backwards* error. Glueing only the *front* edge is what I meant to say, I just had the picture reversed in my mind as I was writing so late at night. Bill Bremmer RPT Madison, Wisconsin <A HREF="http://www.billbremmer.com/">Click here: -=w w w . b i l l b r e m m e r . c o m =-</A> ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/6c/bf/de/cb/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC