Now that you mention it, yes, the Yamaha spinet I service has the same nice fallboard. Terry Farrell ----- Original Message ----- From: "Tom Driscoll" <tomtuner@attbi.com> To: <pianotech@ptg.org> Sent: Monday, August 19, 2002 9:11 AM Subject: RE: E.T.D. > > > -----Original Message----- > From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org] On Behalf > Of Farrell > Sent: Monday, August 19, 2002 7:56 AM > To: pianotech@ptg.org > Subject: Re: E.T.D. > > I service a VERY nice 1968 Yamaha spinet. > > Terry Farrell > > ----- Original Message ----- > From: "Clark A Sprague" <clarks11628@juno.com> > To: <pianotech@ptg.org> > Sent: Sunday, August 18, 2002 10:52 PM > Subject: Re: E.T.D. > > > > Devlon, Yamaha DID make a spinet piano, once upon a time. We have > one > > in our store we took in on trade. I forget how old it is, though, but > > 1960 something rings a bell. > > Clark Sprague, RPT > > > List, > I remember tuning a Yamaha spinet (60's model ) that had the > Wurlitzer small vertical fallboard . I assumed that Wurl. was making the > case and perhaps marketing also. > Tom Driscoll > >
This PTG archive page provided courtesy of Moy Piano Service, LLC