This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Kevin, If the bass is about 30 cents flat I want to raise the note about three = cents sharp ( about 10% ) of pitch. So with a SATlll that raises the = pitch 25% that would result in too much over pull for me so I will set = the over pull for 12 cents and roll the program into the machine. I take only one measurement at A2 to arrive at my over pull. Works very = well for me. I use the 25% in the tenor and about C4 the 30% to the top then retune. On pianos 25% or less flat or sharp I use the Verituner 100 and its 10% = bass, 30% tenor, and 36% treble and retune. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Kevin E. Ramsey=20 To: pianotech@ptg.org=20 Sent: Wednesday, August 21, 2002 7:40 PM Subject: Re: Pitch Raises ... Multiple Passes? > > All wound strings: 1/5 (Example: You test 10 notes, or so, and = find them > about 30 cents flat. You would set your ETD to +6 cents sharp and = tune those > strings to that setting.) Here's another little brain saver: What if you're pitch raising a = piano and want to do a 20% overpull in the bass, and it's, say, 28 = cent's flat. (let's see, one fifth of twenty eight would be ......... = ah........ ah........) =20 Take 28, and double it for 56. Move the decimal point over to the = left one place.=20 5.6 is 1/20th of 28.=20 At least, that's how I do it.=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c8/fd/8f/12/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC