So if you could build a tuning jig, you might consider it?..;-] David I. ----- Original message ----------------------------------------> From: Ron Nossaman <RNossaman@cox.net> To: <pianotech@ptg.org> Received: Thu, 22 Aug 2002 07:11:42 -0500 Subject: Re: Unison Flatter than each Individual string? >>So you don't upgrade your shop tools, etc? >Sure I do. And when I have a large number of repetitive operations to do in >the shop, I build jigs to do the thinking for me and keep the uniformity of >the result as high as I can. Then I just mind the needs of the jig during >the process. The results are more uniform, hopefully faster cycle time, >with considerably less demand on me to produce those results. It also makes >it a lot less interesting. The fun is in designing and building the jig. >> >Maybe they're scared to death they will find out how bad >> >a tuner they really are if they had a means of comparison. >> >>A very real possiblity... >Interesting point to pick out from that paragraph. >>Yeah, good points all of them...with this imperfection of the piano I >>don't see the >>need to waste any more of my energy on the "hand-made" piano tuning than >>necessary. >Ah, but the personal decision of what is wasted energy and what is >necessary is precisely the point. >>The whole wonderfulness of the ETD is letting it do the roughing in and >>letting your ear do the fine stuff. >Absolutely. I wouldn't give up my jigs without a fight. I'm a better >producer of tedious repetitive task results because of them. >Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC