Thank you Newton. Indeed, regulation seems to be still possible. So I will add some shim under the action frame. Stéphane. ----- Original Message ----- From: "Newton Hunt" <nhunt@optonline.net> To: <pianotech@ptg.org> Sent: Tuesday, August 27, 2002 8:54 PM Subject: Re: warped keybed | Hi Stéphane, | | I think I would look at why this is happening, what part(s) are warped | and how the current situation effects the case parts (fallboard and | keyslip(, the action regulationablity and if all looks like it will work | then I would cut and glue on a shim under the front rail, then plane | until it is properly bedded. | | I would check everything out before gluing it on, fall, slip, pinblock | key blocks, etc. Don't do anything you cannot undo until you have | checked everything out. | | Newton | |
This PTG archive page provided courtesy of Moy Piano Service, LLC