In a message dated 08/26/2002 6:09:41 AM Pacific Daylight Time, philromano@attglobal.net writes: > And Bob should know, having just spent a week at S&S NY slaving over a hot > back action in the Damper Class (Hi Bob!). And Hi Phil! And finding out that they put in a whole back action, including locating and drilling the pivot blocks, locating, drilling, and bushing the guide rail, travelling underlevers, installing the wires in the heads, gluing on felts, bending wires, and timing dampers, in SIX HOURS. A factory visit certainly gives you more respect for what goes on there. Bob
This PTG archive page provided courtesy of Moy Piano Service, LLC