Yes, I think mine, at least, is very beautiful. Sorry you couldn't save yours. ----- Original Message ----- From: "Alan R. Barnard" <mathstar@salemnet.com> To: <pianotech@ptg.org> Sent: Thursday, August 29, 2002 8:04 PM Subject: Re: 4 pedals > Had one of those GPB Crowns in my shop, way beyond playing but aren't they > beautiful. Even the back of the piano shows tremendous attention to detail > and beauty--compared the movers handles to the chopped-off broom handles > many pianos sport nowadays! > > We ended up using this as the centerpiece of a magnificent bonfire--a real > waste in many ways---the plate weighed a (figurative) ton! I broke it into 5 > pieces that are still leaning against an outside wall as I haven't figured > out how to dispose of them. Trash guys just stared at me when I suggested > they take it! > > Alan R. Barnard > Salem, MO > Alan Barnard > > ----- Original Message ----- > From: "Craig Glasser" <cglasser@hotmail.com> > To: <pianotech@ptg.org> > Sent: Thursday, August 29, 2002 9:14 AM > Subject: Re: 4 pedals > > > > I have a 1895 Geo. P. Bent "Crown" upright. On this piano the fourth > pedal > > is called a "practice clavier". It is intended to allow one to practice > > playing and not make much noise. So, on mine, the practice clavier > prevents > > the hammers from striking the keys. > > > > ----- Original Message ----- > > From: "John Ross" <jrpiano@win.eastlink.ca> > > To: <pianotech@ptg.org> > > Sent: Thursday, August 29, 2002 4:08 AM > > Subject: Re: 4 pedals > > > > > > > Hi Tom, > > > I think it is a practise mute, that the felt overhang has been removed > > > from. The reason the hammer shanks hit it, is because the hammers are > > > worn, or have been carded, changing their length. > > > Regards, > > > John M. Ross > > > Windsor, Nova Scotia. > > > jrpiano@win.eastlink.ca > > > ----- Original Message ----- > > > From: "Tom Dickson" <td_tuner@hotmail.com> > > > To: <pianotech@ptg.org> > > > Sent: Wednesday, August 28, 2002 9:30 PM > > > Subject: 4 pedals > > > > > > > > > | Hi, Folks, > > > | > > > | I floated this "balloon" earlier this week, but I still have not > > > gotten a > > > | totally satisfactory answer. > > > | > > > | A 1905 Bell piano has 4 pedals. John told me about the third > > > one - a > > > | "rinky-dink" effect for the sound (leather stips go between the > > > strings and > > > | the hammer). Very much appreciated! > > > | > > > | The 4th pedal moves a stick that is below the hammers and > > > apparently the > > > | shanks hit ( it has thick felt that is in the lengths to affect all > > > shanks). > > > | My question is: Should this be regulated so that the hammer > > > impact is > > > | reduced - therefore the volume is much lower, OR should this be > > > regulated so > > > | that the hammers never hit the strings - such that the pianist can > > > practice > > > | fingering, but make no sound? > > > | > > > | I would like to be sure that my reguation of this device is > > > correct. > > > | > > > | Any help would be appreciated! > > > | > > > | Sincerely, > > > | Tom Dickson, > > > | Regina, SK, Canada > > > | > > > | _________________________________________________________________ > > > | Send and receive Hotmail on your mobile device: > > > http://mobile.msn.com > > > | > > > | > > > > > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC