Hi Terry, It does not need to be adjustable if it is custom made. Take a picture to a welding shop and see if they are willing and able. And yes I have seen three made locally--at about 1/3 the cost of a commercial unit--very much stronger too! At 07:42 PM 12/12/02 -0500, you wrote: >I appreciate the suggestion Don, but I'm having trouble imagining this. How in the world would a welder even know where to start? Have you done such a thing? > >Terry Farrell > > >> Hi Terry, >> >> It's cheaper and stronger to have a local welder custom make trucks for >> Grands. >> >> At 07:02 PM 12/12/02 -0500, you wrote: >> >I need to order both grand and vertical piano trucks for two clients. I >> know Schaff, Jansen, Pianotek, etc. has various ones. Does anyone have a >> recommendation for one that might be better than another? And why? Thanks. > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. Tuner for the Center of the Arts mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC