Epoxy Repair to bridge top

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
.
> Subj: Re: Epoxy Repair to bridge top 
>  Date: 12/16/2002 8:09:23 PM Pacific Standard Time
>  From: <A HREF="mailto:jonpage@attbi.com">jonpage@attbi.com</A>
>  Reply-to: <A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
>  To: <A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
>  Sent from the Internet 
> 
> 
> 
> At 09:37 PM 12/16/2002 -0500, you wrote:
> >Is it just left glossy or what? 
> 
> Why not put on a coat of a low luster finish material.
> Regards,
> 
> Jon Page,   piano technician
>  Harwich Port, Cape Cod, Mass.
>  <A HREF="mailto:jonpage@attbi.com">mailto:jonpage@attbi.com</A>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 

          What did you have in mind.  With shellac or epoxy I get a lustrous 
rich looking semi gloss finish with very little work. 
        Dale

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/88/77/8a/25/attachment.htm

---------------------- multipart/alternative attachment--