soundboard finish

[Farrell]

If you can't scribe a line, do whatever scribing possible, measure the rim thickness (at glue joint) and tape that much plus a hair for insurance. I suppose you could always touch up any small ring around the rim of unfinished board - or not.

Just curious, what is your schedule/materials for finishing the board?

Terry Farrell
  
----- Original Message ----- 
From: "Marcel Carey" <mcpiano@globetrotter.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Thursday, December 19, 2002 7:52 AM
Subject: RE: soundboard finish


> Thanks Terry, this is what I had in mind too, but the rim in this case
> is beveled and not easily accessable for acribing from under. I guess
> I'll have to do this anyway.
> 
> Marcel
> 
> 
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives