---------------------- multipart/alternative attachment In a message dated 2/8/02 11:44:44 AM Central Standard Time, sckline@attbi.com writes: > >Third, after I had them all hung correctly, I had to take them all off > >again the shape the tails. > > It is possible to shape the tails with the hammers still on the shanks. > Either buy Bill Spurlock's jig, which allows for mounted or unmounted > hammers, or build a version where the part which swings accommodates the > shank and knuckle. I built myself one, and it has been great! > > Susan > > Susan I guess I didn't explain that right. I did keep the hammers of the shank. What I meant to say is that I had to remove the shanks and flanges off the rail again to shape the tails. I remove the shank and flange when I remove a hammer. I don't like to subject the center to any more contortion than necessary. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e3/5e/23/a8/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC