Knuckle Removal was Action too big

John Ross jrpiano@win.eastlink.ca
Fri, 8 Feb 2002 18:45:29 -0400


This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
There was a very nice tool, I saw at a convention, for removing the =
knuckles. It was called a Hart Knuckle Buster. He is the guy that =
designed the spring tool. His phone # is 970-434-5558.
It fitted in a drill press, and with the drill press turned off, it =
pressed them off. The tool had a slot that tapered down, and also was =
sharpened to razor sharpness. It sliced through the glue joint, then =
levered the knuckle off. There was no damage to the knuckle or the =
shank.
It was the best tool I have seen for this job
Regards,

John M. Ross
Windsor, Nova Scotia.
jrpiano@win.eastlink.ca
  ----- Original Message -----=20
  From: Marcel Carey=20
  To: pianotech@ptg.org=20
  Sent: Friday, February 08, 2002 4:51 PM
  Subject: RE: Knuckle Removal was Action too big


  There is a special pair of pliers one can use to remove knuckles. They =
look like big cutters and they work just fine. The way their blades work =
is that they litterally pull the knuckle out ot it's groove. Fast and =
easy.

  Marcel Carey, RPT
  Sherbrooke, QC
    -----Original Message-----
    From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On =
Behalf Of Richard Brekne
    Sent: 8 f=E9vrier, 2002 13:06
    To: pianotech@ptg.org
    Subject: Knuckle Removal was Action too big


    Carl Meyer wrote:=20
      Hi! Mary,  I recall a tech demonstrating a procedure for removing =
knuckles at a tech session some years ago.

    I saw that demonstration too Carl. One of the reasons I am leary of =
going to Chicago...grin. All that Blood... shhheshh.. Poor fellow who =
was voluntered  wont be knocking on anyones doors again soon me thinks.=20
      He sliced through the buckskin and felt with a razor blade, peeled =
the felt and buckskin off and with a sharp small side cutting pliers cut =
the remaining wood at two or three places and split it out of the slot.  =
I haven't actually done this but it looked easy.  Hope that works for =
you.  Practice on some old knuckles.=20

    Shhesshhh.. and I thought I was gross... practice on some old =
knuckles indeed ! :) Best Carl Meyer  Assoc. PTG=20
    Santa Clara, California=20
    cmpiano@attbi.com=20
     BOINNGGG --- Round two !=20

    --=20
    Richard Brekne=20
    RPT, N.P.T.F.=20
    Bergen, Norway=20
    mailto:rbrekne@broadpark.no=20
    http://home.broadpark.no/~rbrekne/ricmain.html=20
     =20


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/26/44/dd/4f/attachment.htm

---------------------- multipart/alternative attachment--




This PTG archive page provided courtesy of Moy Piano Service, LLC