Thanks Don, I didn't know that. It really doesn't matter though because you sample anything you like with TuneLab. Greg Don wrote: > Hi Greg, > > For measurement purposes RCT uses a2 to a6. This is not currently user > selecteable. And of course you are right to compare tunings the same notes > should be sampled. > > At 02:42 PM 2/27/02 -0500, you wrote: > >Ron, > > I wonder what the difference might be using the same notes, A's or C's > who > >cares, for all three programs. TuneLabPro will use any notes you choose in my > >experience so too will RCT I think. If Veritune is listening at the same > time, > >good. Does this sound like a fair test? Was the piano tuned first or no? > If not > >how far off was it to start? I have to go back and look again but the curve > >between TuneLab and Veritune didn't seem all that different except in the > bass. > >they may be a few cents off but it's fairly parallel throughout. Did I > remember > >it correctly? O.K. Now i have to go look again. > > > >Greg > > > >Ron Koval wrote: > > > >> Greg wrote > >> > > >> Ron, > >> There does indeed appear to be a difference. You say that you did not > >> tune the piano. How did you come up with the numbers from the Veritune? > What > >> notes did you sample for each program. The same notes for each? > >> > > >> snip > >> > >> I tried to follow the directions that come with each machine. So, for > >> Tunelab, I sampled all the C's, plus the notes at the stringing break, and > >> A4. For RCT, I sampled the 5 A's. For the Verituner, I let it listen as I > >> was doing the other samples, plus I let it hear all the wound strings. In > >> fine tune mode, the VT lists multiple partial offsets, so I just picked the > >> ones that matched the other machines. > >> > >> Hope this helps! (no I haven't graphed them yet) > >> > >> Ron Koval > >> > >> _________________________________________________________________ > >> Join the world’s largest e-mail service with MSN Hotmail. > >> http://www.hotmail.com > > > >-- > >Greg Newell > >mailto:gnewell@ameritech.net > > > > > > > > > > Regards, > Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > > mailto:pianotuna@accesscomm.ca > http://us.geocities.com/drpt1948/ > > 3004 Grant Rd. > REGINA, SK > S4S 5G7 > 306-352-3620 or 1-888-29t-uner -- Greg Newell mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC