> From: "Greg Torres" <Tunapiana440@cox.net> > Reply-To: pianotech@ptg.org > Date: Mon, 1 Jul 2002 01:54:20 -0500 > To: <pianotech@ptg.org> > Subject: Re: Feeling the Hammers when playing > > Antares, > > Are you referring to the front punching or the balance rail punching? I can > see if the balance rail punching was firm that there could be more energy > transmitted (RE: the 'see-saw' analogy) and I can maybe see being able to > feel the shock of hammer impact/action rail vibrations, etc., but I cannot > see how the front rail punching being firmer could in any way produce more > energy to the hammer...perhaps am I missing something...it wouldn't be the > first time ; ) No no , I meant the front rail punching and I will quote my own words otherwise I'll have to type it all over again. quote : "Why does a tone get louder when you replace the front punching with a more dense one? We have to compare it with a seasaw on which two little children sit. One child pushes off from the ground, the other hits the ground. The ground is soft because it is sand so the impact is not painful. OK..I can see that you already got it. Now we replace the sand...it is hard cement. The child coming down hits the cement BAM! it hurts! and the other child on the other end of the the seasaw is almost catapulted off into the sky. The difference lies in the hardness of the ground, which, in our case is the front punching. The opposite takes place as well but is a bit more dampened by the different action parts absorbing the blow of the hammer against the string. Also, the hammer blow against the string causes overall vibrations throughout the whole instrument resulting in vibrations we can perceive with our sensitive fingers, just like you can feel the vibrations if you put your hand against the side of the grand." friendly greetings from Antares, Amsterdam, Holland "where music is, no harm can be" visit my website at : http://www.concertpianoservice.nl/
This PTG archive page provided courtesy of Moy Piano Service, LLC