Joe, If your tag line is correct (at least for you) then 1/7 of your life is wasted! Think about that one for a while!!! Greg Newell At 06:00 PM 7/8/2002, you wrote: >Might I recommend the Delta/Rockwell Radial Arm Drill Press. Even though, >the current model is not a good as the olde ones, it still quite versatile. >Get an extra column & base unit, for it. Then, when needed for drilling in >the piano just take the cross member head off and mount it on the other >column/base. >Best regards, >Joe Garrett, RPT, (Oregon) > > >Monday's Suck! Greg Newell mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC