I'm tuning some Kawai 506S pianos now that have some pins sooo tight that I'm afraid they're going to shear off. I guess there are a lot of tight pins out there. James Baker ----- Original Message ----- From: "Greg Torres" <Tunapiana440@cox.net> To: <pianotech@ptg.org> Sent: Tuesday, July 09, 2002 3:09 AM Subject: Re: tuning hammer tip > I remember having to do floor tunings on new Kimball verticals. And I'll bet > that the pins on those bad boys were much tighter than the Baldwin you > mentioned... > > Greg Torres >
This PTG archive page provided courtesy of Moy Piano Service, LLC