Keith, The blow isn't an issue yet. It's the key height and keyslip that I can't get right yet. The key dip setting should be 10mm which I can barely get if I have the back rail high enough to fit the key slip correctly (so you can't see the bottom of the key). Ray -----Original Message----- From: Keith Roberts [mailto:kpiano@goldrush.com] Sent: Friday, July 19, 2002 1:23 PM To: pianotech@ptg.org Subject: Re: Bechstein key height How far does the front rail pin extend into the key? What is your blow distance and projected dip setting now? Keith ----- Original Message ----- From: "Breakall, Raymond" <rbreakal@richmond.edu> To: <Pianotech@ptg.org> Sent: Friday, July 19, 2002 5:42 AM Subject: Bechstein key height > > Dear list, > > I am trying to fiqure out key heighth for a Bechstein grand. I must jack up > the the back rail felt to fit properly with the keyslip. Then I find I don't > have enough movement in the key to get enough key dip. Any ideas? Thanks > > Ray > > > Ray Breakall > Piano Technician > University of Richmond > Richmond, VA > (804)287-6342 > >
This PTG archive page provided courtesy of Moy Piano Service, LLC