Has anyone replaced a CAed block yet? To my recollection It has been about 6 years since my first CA block. and all to my knowledge are holding fine. imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Jim Coleman, Sr." <pianotoo@imap2.asu.edu> To: <pianotech@ptg.org> Sent: Saturday, July 27, 2002 12:27 AM Subject: CA gluing Grand pinblocks > Hi to all: > > As one who has successfully used CA glue on individual pins in > Grands with great success, I began to imagine the future problem > which will arise when one tries to remove the plate later if the > entire pinblock is so treated. > > It occurred to me that a simple solution would be to remove the > action, turn the piano up on its Bass side and treat the bottom of > the pinblock with CA glue. This avoids the problem of the plate > sticking to the pinblock, but it solves the problem of getting the > CA glue directly to the tuning pins. If this helps anyone, you may > send the check directly to my email address. Actually cash is > preferred. > > Jim Coleman, Sr.
This PTG archive page provided courtesy of Moy Piano Service, LLC