In a message dated Sat, 27 Jul 2002 3:46:46 PM Eastern Standard Time, macman@pathfinder.dnsalias.com writes: > > > >Terry, It is not the coils that would give you a problem but removal of the > >plate might be a little tough if too much glue was used. > > Wouldn't it just be a matter of smattering the pinblock/plate glued > area with a lot of acetone to dissolve the CA glue holding them > together? You might trash your pinblock or do unhappy things to the > finish on the plate, but you dont' really care since you're > replacing > the pinblock and repainting the plate anyway... > > -Tyler I was wondering how many people have had problems separating a CA treated pin block from the plate and if this is really a worry? David Koelzer Vintage Pianos DFW
This PTG archive page provided courtesy of Moy Piano Service, LLC