Does it have brass rails or the Billings brass flanges? Where are you located at? Keith R ----- Original Message ----- From: "Tom Servinsky" <tompiano@gate.net> To: <pianotech@ptg.org> Sent: Wednesday, March 06, 2002 3:31 PM Subject: Mason& Hamlin upright action restoration > List > I have a customer with an early 1900's full Mason & Hamlin upright which > needs a complete action restoration. I do very little work on uprights > anymore, especially one with brass flanges. I'd rather turn this over to > someone who has a lot of experience in restoring brass flange actions. > I'm looking for someone to overhaul the action (wippens, if available, > hammer butts, shanks, hammers, and new brass rails if needed). > Would appreciate any assistance. > Tom Servinsky,RPT > >
This PTG archive page provided courtesy of Moy Piano Service, LLC