Ron: Do you still use the pilot hole technique when drilling pinblocks? Does that change the feed speed philosophy because of less heating up of the bit? David Love ----- Original Message ----- From: "Ron Nossaman" <RNossaman@KSCABLE.com> To: <pianotech@ptg.org> Sent: May 05, 2002 1:14 PM Subject: Re: Pinblocks > > > > > Hi list, > > I forget to ask, what drill bit do you prefer with the deliginit block,and > > the best source for them.I'm using 2/0 pins, 21/2 long. > > Thanks, > > Hazen Bannister > > > I use either 17/64 (0.2657"), or 6.8mm (0.2677"), and Denro pins (blued, > mostly). > > Ron N >
This PTG archive page provided courtesy of Moy Piano Service, LLC