This is a multi-part message in MIME format.
---------------------- multipart/alternative attachment
----- Original Message -----=20
From: Erwinspiano@AOL.COM=20
To: pianotech@ptg.org=20
Sent: May 04, 2002 8:57 AM
Subject: Re: Curve on Bridge Bottom
Richard, Terry
It doesn't take much to flatten an unsupported =
rib as it doesn't really take on its maximum stiffness till after it =
becomes part of the ply wood componet comprising the whole soundboard =
system at which point the cumulative resistive forces of cross banded =
woods and compression takes effect.... =20
Rather depends on the cross-section of the rib, doesn't it?=20
Del
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/53/a7/81/a9/attachment.htm
---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC