Band saw blade width for pin blocks

[Greg Newell]

---------------------- multipart/alternative attachment
David,
         I like 1/4". Too much more and you can't maneuver. Too much less 
and it won't cut well or you have to go too slow.


At 07:15 PM 5/9/2002, you wrote:
>What would you all say is the optimum band saw width for rough cutting the 
>pin block to shape it to the flange.  Wider gives a more stable cut, but 
>is less easy to turn.
>
>David Love

Greg Newell
mailto:gnewell@ameritech.net
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0b/0b/65/42/attachment.htm

---------------------- multipart/alternative attachment--