Bandsaw blade width for pinblocks

[Erwinspiano@AOL.COM]

---------------------- multipart/alternative attachment
In a message dated 5/9/2002 5:46:28 PM Pacific Standard Time, 
jonpage@attbi.com writes:

         David 
    I use my sawz all for this cut
>>>>>>Dale>>>>....

> At least a 1/2" resaw blade. Cut the long, straight lines first and then 
> tend to the curves.
> A jig saw is needed to cut straight in at the break unless you have a wide 
> clearance on your bandsaw.
> 
> Regards,
> 
> Jon Page,   piano technician
> Harwich Port, Cape Cod, Mass.
> <A HREF="mailto:jonpage@attbi.com">mailto:jonpage@attbi.com</A>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/52/40/f3/61/attachment.htm

---------------------- multipart/alternative attachment--