----- Original Message ----- From: "Ron Nossaman" <RNossaman@KSCABLE.com> To: <pianotech@ptg.org> Sent: May 10, 2002 4:39 AM Subject: Re: Curve on Bridge Bottom > >I find it very hard to believe that Steinway do not plane an arc on the > >upper side of the ribs before gluing up. Are you sure this is their practice? > > > >JD > > I've never heard anything to the contrary, even from Steinway. Standing in > the factory in front of one of their rib presses, I listened to a > description of the process from Bill Garlick, who was working for them at > the time. Flat ribs. As far as I know, they've never done it any differently. > > Ron N As of my last visit there three or four years back, this was still their practice. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC