Hi paul, If the dampers are lined up and the over ring is now due to the strings being slightly too wide of where they need to be, use a string hook or your favorite tool to move the string sideways toward the damper. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Paul Chick (EarthLink)" <tune4@earthlink.net> To: <pianotech@ptg.org> Sent: Tuesday, May 14, 2002 5:48 AM Subject: Damper Felt > List > I was called to tune a grand and fix "a ringing noise." The piano turned > out to be a Chickering Quarter Grand, and the "ringing noise" came from the > dampers from the break on up, misaligned with the strings as if someone > tried to clean them or moved them inadvertantly. Now the tricord wedges are > distorted and will not sit correctly on the strings. Does anyone have a > trick for straightening crooked wedge dampers without removing them? These > are threaded damper wires and removal will be a challenge. Clearance is a > real problem, but I'll take them off if I have to. Oh, by the way, they're > using the piano for a wedding this Saturday. Any ideas? > > Thanks. > > Paul Chick >
This PTG archive page provided courtesy of Moy Piano Service, LLC