Tom, You need to visit my site below<G> Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: <Tvak@AOL.COM> To: <pianotech@ptg.org> Sent: Tuesday, May 14, 2002 7:26 AM Subject: center pins in the field > In my continuing effort to have everything I could possibly need in the > field, I now carry my Schaff center pin container with me. The thing is, I > don't need 50 center pins of each size to repair that wobbly hammer butt > flange. > > I'm wondering if any of you have found, or improvised, a center pin container > that is smaller and lighter (possibly containing just enough pins for a field > repair) than the Schaff. > > Any ideas out there? > > Thanks, > > Tom Sivak
This PTG archive page provided courtesy of Moy Piano Service, LLC