Dampp Chaser AND Government Work

[Tom Driscoll]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
 

 

 

 

Wim ... had a key that wouldn't reset on soft or medium blows despite
all adjustments to wippen height, let-off, etc. Then I noticed the jack
center pin peeking out on one side! In go the needlenose pliers, squeeze
go the needlenose pliers, pin centered, key resets every time ... and
you, Sir, have justified your whole existence! It was the end of a very
long and tiring day and I needed to get outa there. Thanks for that tip.

 

Alan Barnard

Salem, MO

 

 

Not so fast Homeboy ! Better repin that part cause the pin is not tight
in the birdseye and will walk out again. 

          25 years ago I pushed a pin back in place on an acro, pleased
as could be with myself ,and had to drive back ( one hour each way ) to
fix it correctly. That was also the day I learned how much fun it is
when the acro guided rail leaves the pickup fingers !  Good luck

          Tom Driscoll


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b5/46/c6/2d/attachment.htm

---------------------- multipart/alternative attachment--