Rebuild or Refinish?

[pianolac]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
The most efficient way to go is:
1.Spray all coats on the piano.
2. Rebuild the piano.
3. Rub the piano.

This method will allow for curing while rebuilding.  Make sure you spray =
enough material to avoid rub through, because you will have to wait for =
a touch up to cure and match the look of your cured coating.

Arthur Grudko
www.pianolac.com
  ----- Original Message -----=20
  From: Jack Houweling=20
  To: Pianotech=20
  Sent: Friday, November 22, 2002 1:26 AM
  Subject: Rebuild or Refinish?


   I am doing more rebuilding now and would like to know if you rebuild =
first and then refinish or vise versa. In the past I have done each on =
separate pianos but never together. Which way works best and why?
                                                                         =
 Jack=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/74/1c/45/fd/attachment.htm

---------------------- multipart/alternative attachment--