>Hi Ron, > Thanks for your reply. I hope this don't sound like a stupid question, >but If I do this, do I need to unwrap the windings where I splice. > Thanks in advance. > >Benny L. Tucker That's a perfectly good question, to which the answer is - sometimes. If there isn't enough bare wire to work with, unwind a little. As long as you still have wrap on the swage, you should be ok. Bending the loop for the tie in the flattened wire is a little strange, and the wire is more likely to break there when you bend it, but when you get away with it, it's the quickest and easiest repair. Sometimes it doesn't work, and you're back to either the universal or a custom replacement, but it works often enough to be worth a try. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC