---------------------- multipart/alternative attachment In a message dated 10/14/02 10:47:22 AM Central Daylight Time, mfarrel2@tampabay.rr.com writes: > Have a Young Chang 150 cm grand in a church, damper tray hinges on 3 > flanges, center pins have fallen out of flanges. It appears the only way to > remove the flanges and the tray requires separating all the leaded damper > blocks from the damper wires and then the whole unit will come out to be > repinned. Is anyone aware of any short cut to do this repinning without > taking all the dmpers out? > > Thank you. > > Terry Farrell > > > NO. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/51/fc/88/5c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC