Bridge pin bit size -Phil Ford

[Erwinspiano@aol.com]

---------------------- multipart/alternative attachment
In a message dated 10/25/2002 11:42:36 PM Pacific Daylight Time, 
pianobuilders@olynet.com writes:


> Subj:Re: Bridge pin bit size -Phil Ford 
> Date:10/25/2002 11:42:36 PM Pacific Daylight Time
> From:<A HREF="mailto:pianobuilders@olynet.com">pianobuilders@olynet.com</A>
> Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A>
> Sent from the Internet 
> 
>               My Mistake and thanks for the info.Hey  I got the www part 
> right. Not!

                     Dale

> 
> Are you, perhaps, referring to the W. L Fuller Company at:
>     <A HREF="http://www.wlfuller.com/">http://www.wlfuller.com/</A>
>  
> Del
>  
> 


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a8/49/62/18/attachment.htm

---------------------- multipart/alternative attachment--