Hammer Replacement Sheet

[Isaac OLEG]

Thanks, Joseph, but you forget the file probably !

Bests.

Isaac OLEG

> -----Message d'origine-----
> De : pianotech-bounces@ptg.org
> [mailto:pianotech-bounces@ptg.org]De la
> part de Joseph Garrett
> Envoyé : dimanche 27 octobre 2002 20:33
> À : pianotech@ptg.org
> Objet : Hammer Replacement Sheet
>
>
> Enclosed is my Hammer Replacement Sheet. It helps the
> hammer maker/supplier
> to know exactly what you want, IMHO. It was developed from
> an olde Ronsen
> Spec. Sheet. If nothing else it is my Work Sheet for doing
> my own boring,
> coving, etc.
> Best Regards,
> Joe Garrett, RPT, (Oregon)
> P.S. I hope it makes it through!<G> My last attempts, from
> my scanner, were
> oversized disasters! :-(
>
> Been There, Didn't Like It, So I'm Here To Stay! [G}
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>