Rim Width

[jolly roger]

---------------------- multipart/alternative attachment

Hi Terry,
                 Just measure the thickness of the outer rim, and then the 
thickness of the rim at the bottom and subtract.

Roger

At 09:40 PM 9/6/02 -0400, you wrote:
>How wide is the inner rim beveled area of a Steinway D - or what width is 
>about the maximum that one commonly runs across (that is, how thick is the 
>joint between the inner rim top surface and the soundboard edge)? I need 
>to make clamping blocks for clamping a soundboard to the rim, and want to 
>make the lower edge (the part that presses against the soundboard) as wide 
>as the wider beveled areas of pianos. I know the D has a fairly thick rim 
>- but perhaps that doesn't have much to do with how wide the beveled top 
>part is.Thanks.
>
>Terry Farrell
>


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ff/6b/67/d0/attachment.htm

---------------------- multipart/alternative attachment--