gordon stelter wrote: > Will this also radically improve the tone of uprights: > V-ing the upper plate bridge to 1mm at top? > ( besides providing a little more downbearing, > perhaps? ) I usually use wet and dry sandpaper for > this area. > Thump > I use this on uprights all the time, but again only if you are dealing with iron that is soft enough. I have even taken out the brass half round found often on uprights and reshaped that to a V shape with very good results. I prefer the 0.5mm that McMorrow recommends. -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC