It's not for making a finished soundboard. Just for gluing up the ribless panel. And that if fine to make flat. Terry Farrell ----- Original Message ----- From: "Keith Roberts" <kpiano@goldrush.com> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, September 13, 2002 10:13 PM Subject: Re: Soundboard Panel Gluing > Won't work unless you want a flat soundboard or they can make you one with a > 40 to 60 foot radiused arc. > Keith R > ----- Original Message ----- > From: "Farrell" <mfarrel2@tampabay.rr.com> > To: <pianotech@ptg.org> > Sent: Friday, September 13, 2002 6:29 PM > Subject: Soundboard Panel Gluing > > > > I've been trying to figure out a good way to glue up a soundboard panel. > > > > And then I found it trolling on the web: > http://www.quickmachinerycompany.com/products/LPP/index.html > > > > Problem solved. > > > > Terry Farrell > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC