Mike,
Pinblock too thick...rebuilder probably thought more pinblock, better for
tuning...forgot about the drop screw...well now can think of only three
possible solutions...(1) can drop screws be filed and cut to regulate and
pass under pinblock (yes)(no)....(2) grind off excess pin block....can't be
done in customer's house... ( 3)
remove pin block.....MAJOR PROBLEM>>>BIG MISTAKE ON REBUILDER'S PART..
On a few occassions I have be able to file drop screws and cut slot for
regulation.
Tommy Black
Decatur, Ala.
This PTG archive page provided courtesy of Moy Piano Service, LLC