Hang'n dem Hammers

[antares]

Well Ricardo,

Basically we use every first and last hammer of every section, but in the
last two treble sections it is better to make sample hammers i.e. try out
what kind of sound the new hammers give.
Once you're sure about the right position it is like what we say in
Amsterdam : "Kat in het bakkie" which means : cat on the litter box, which
means : the cat found the right spot and it is not going to bother you.

Get it?

OOr


friendly greetings
from

Antares,

Amsterdam, Holland

"where music is, no harm can be"

visit my website at :  http://www.concertpianoservice.nl/


> From: Richard Brekne <Richard.Brekne@grieg.uib.no>
> Reply-To: Pianotech <pianotech@ptg.org>
> Date: Sun, 29 Sep 2002 17:55:49 +0200
> To: PTG <pianotech@ptg.org>
> Subject: Hang'n dem Hammers
> 
> Hi folks
> 
> Just curious about how many of you hang hammers by taking
> off every other one and more or less copying the old line,
> and how many use the << two sample hammers at the end of
> each section >> method. Also was wondering what you feel are
> the pros and cons of each method.
> 
> I've always used the alternate hammers method. It makes
> pretraveling shanks a bit difficult, unless you travel all
> the old shanks before you start, and it seems like I end up
> having to burn the shanks a bit more then perhaps I'd like
> too. But I do get a real quick dead on line. Guess I am
> looking for a good reason to learn a new approach :)
> 
> Any good words of advice ?
> --
> Richard Brekne
> RPT, N.P.T.F.
> UiB, Bergen, Norway
> mailto:rbrekne@broadpark.no
> http://home.broadpark.no/~rbrekne/ricmain.html
> 
> 
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>