Hang'n dem Hammers

[jolly roger]

---------------------- multipart/alternative attachment
Hi David,
                This is why I preach arcing the tails after they are glued 
on the shank. That way you get a nice 2 1/2" radius and the arc is always 
square to the hammer rail.
   This paramount for high secure checking, and good repition.

Regards Roger

  the radius on the tail should not affect the inside edge of the tail for 
lining up against the rail of the jig, unless you are taking too much 
material off and actually shortening the hammer tail.

>David Koelzer
>Vintage Pianos
>DFW


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/88/a1/20/98/attachment.htm

---------------------- multipart/alternative attachment--