Kimball console - Schwander action - butt springs

[Isaac OLEG]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
but noisy eventually

Isaac OLEG

Entretien et réparation de pianos.

PianoTech
17 rue de Choisy
94400 VITRY sur SEINE
FRANCE
tel : 033 01 47 18 06 98
fax : 033 01 47 18 06 90
cell: 06 60 42 58 77

  -----Message d'origine-----
  De : pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]De la
part de Don Price
  Envoyé : dimanche 20 avril 2003 01:20
  À : Pianotech
  Objet : Re: Kimball console - Schwander action - butt springs


  Some round toothpicks are the right size.

  Don
    ----- Original Message -----
    From: Kerry Cooper
    To: Robin Blankenship ; Pianotech
    Sent: Saturday, April 19, 2003 4:53 PM
    Subject: Re: Kimball console - Schwander action - butt springs


    Trim a match stick to fit in the hole.
    Kerry
      ----- Original Message -----
      From: Robin Blankenship
      To: pianotech@ptg.org
      Sent: Sunday, April 20, 2003 7:49 AM
      Subject: Kimball console - Schwander action - butt springs


      Hi folks,

      Does anyone have any quick, handy advice for replacing the hammer butt
springs on a Schwander vertical action? That is, how to feed the cord
through the tiny holes.

      Thanks,
      Robin Blankenship
      Southside Piano Service
      Matoaca, VA


      ---
      Outgoing mail is certified Virus Free.
      Checked by AVG anti-virus system (http://www.grisoft.com).
      Version: 6.0.471 / Virus Database: 269 - Release Date: 4/10/03

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/12/9b/88/15/attachment.htm

---------------------- multipart/alternative attachment--