Buzz appeared to originate from rib/soundboard panel interface. Wedge between frame and snugged rib to panel enough to stop buzz. Likely not a good permanent solution, but didn't want to make any irreversible change to a rented piano. Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Thursday, August 07, 2003 10:59 PM Subject: Re: Accoustic Foamn and Dampp-Chasers > > >FWIW, a while back I wedged a rubber thingee off a microphone between a > >rib and the framing on a Yamaha that was buzzing. It was a rental in a > >church and the recital was to commence in an hour or so. I told the lady > >to tell the guy she rented the piano from what I had done. It did cure the > >buzz. > > And the reason for the rib being close enough to the beam to buzz being > what? Soundboardus collapsus? > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC